What is  the cost  to replace Federal  Pacific electric  panel?

Feb 3, 2022

FPE Stab Lok Baltimore   A safe electrical system is invaluable to every home and if you have a Federal Pacific Electrical Panel (FPE), replacing it is the best solution to ensure your home’s electrical safety. Federal Pacific Electrical Panels are commonly found in homes between 20 and 70 years old. These panels were first introduced by Reliance Electric in the 1950s and quickly became installed in millions of homes across the country. It was soon discovered that FPE panels were unsafe and present a great fire risk to homes that have them. Federal Pacific electrical panels were taken off the market in the late 1980’s. Your home’s electrical panel distributes electrical power safely across all branch circuits. It is also built to ensure protection by tripping off in situations like a short circuit, circuit overload, power surge, and so on. If the breaker cannot do this, the chances of an electrical fire starting increase dangerously. How an FPE breaker puts your home in danger FPE Halthorpe   According to reports from the United States Consumer Product Safety Commission (CPSC), Federal Pacific breakers may fail to trip during an overload or short-circuiting. FPE breakers have recorded high rates of not tripping when necessary for your electrical protection. It was also discovered that the breakers tend to enter a lock-up. A lock-up describes a situation where a breaker that has tripped once will never trip in the future regardless of dangerous conditions like an electrical overload.

  • Studies estimate over 2,800 electrical fires caused each year by a Federal Pacific Electrical Panel that didn’t trip.
  • Most of the unreliability of the panel is due to the use of cheap materials in its manufacture and their limited original design.
  • Multiple tests on Federal Pacific Stab-Lok breakers have shown a 1 in 4 failure rate when overloaded.

Distinct risks and problems posed by a Federal Pacific breaker also includes:

  • Crowded wires that are often found within the panel box (AKA Rats Nest).
  • Breakers do not switch off (open circuit), even in the OFF position.
  • Arcing occurs at the bus bars.
  • Federal Pacific breakers trip unexpectedly when the dead front cover is removed.
  • Breakers are often not tightly connected to the bus bar.

Electrical inspectors always encourage homeowners to replace and not repair a Federal Pacific Electrical Panel. Electricians may also hesitate or refuse to fix problems with these panels because they cannot guarantee the results or your electrical safe afterwards. Identifying a Federal Pacific Electrical Panel Federal Pacific You may have a Federal Pacific Electrical Panel if your home is as old as between 20 to 70 years. Since the company no longer exists, you can not purchase a new FPE panel. It can only be present if it was installed in older homes. You can identify an FPE panel with the labels or logos on the front cover. The common appearance is an orange and white label. You can also look out for the name Stab-Lok written inside the panel or on the breaker. A signature red label across the front of the panel is another indication. The cost of replacing a Federal Pacific Electrical Panel may vary depending how many branch circuits are present, additional construction included, accessibility, and other miscellaneous factors. The replacement can generally cost anywhere from $1500 to $2000, and even more. The replacement will include any necessary repairs, rewiring, moving the panel location, and installation that are up to recent National Electrical Codes & AHJ amendments.

Bad Monkey Electric will Inspect, repair & replace your electrical panel and breaker boxes of all kinds

We service & repair all electrical panels:

  • Bulldog
  • Challenger
  • Cutler Hammer
  • Federal Pacific
  • General Electric (GE)
  • GTE Sylvania
  • Menards
  • Midwest
  • Murray
  • Pushmatic
  • Schneider
  • SDG&E
  • Siemens
  • Square D
  • Stab Lok
  • Sylvania
  • Westinghouse
  • Zinsco

When you need an electrician to inspect, repair a breaker box or need an electrical panel replacement, you can count on the team at Bad Monkey Electric. WIRE you waiting! Our electricians are licensed, insured & bonded. But more importantly, we do not hire anyone that we would not trust in our own home. For reliable, affordable electrical panel services, call Bad Monkey Electric today! You’ll be SHOCKED how quickly we respond! Questions? Call us at (410) 616-0008 or email us at Steve@BadMonkeyElectric.com Thank you for reading & have a powerful day!

Share This
Make A Payment